Hydraulic Hose Pipes

Indus trade links is the dealer for Gates make hydraulic hose and their assemblies in Kerala since 1996. These hoses are DNV certified and has been approved as flame resistant by the Lloyds Register Type Approval System. Over the years, Gates has enhanced its reputation by catering the highest quality products and services. The same dedication to quality continues today with the Gates Quality commitment. The meaning of quality in Gates is to meet or exceed customer expectation/satisfaction with world standard products and service experiences that are exceeding the competition parameters. The quality practices of Gates ensure that each “Made in India” product meets the industry’s highest standards and qualifies as Gates global hydraulic and industrial products for fluid conveyance. Gates has a substantial presence in the OE market which they have acquired through their quality products and superior technical know-how. The list of OE clients include JCB, Caterpillar, Atlas Copco, Hyundai, Sany, L&T, Mahindra, Midco etc.

There are 3 categories of hydraulic hose in Gates which covers a comprehensive range of hydraulic applications; low pressure, medium pressure and extremely high pressure range. There is also an additional range called megasys in Gates which is used in applications where a constant pressure is maintained throughout. Rock breaker application is a challenging portfolio where Gates R15 and the newly launched MXG hoses have proved the supremacy in the performance.

Extremely High Pressure

EFG6K SAE 100R15

Meets flame resistance acceptance designation ‘MSHA 2G’ for biodegradable hydraulic fluid.
Superior Impulse performance : tested to 1,000,000 impulse cycles.

Recommended for :Extremely high pressure, high impulse applications. such as hydrostatic transmissions.
EFG6K is designed to meet all requirements of SAE 100R15 specifications and performance requirements of EN 856
4SP (-6, 8, -10, -12) and EN 856 4SH (-12, -16, -20). Compatible with biodegradable hydraulic fluids like polyolester,
polyglycols and vegetable oil. Enviro Fluid hoses also offer significantly lower permeation with petroleum based fluids .

Service Temperature Range : -40ºC to +121ºC

Construction:

Tube : Black oil resistant, synthetic rubber (Nitrile – type C).
Cover :Black oil resistant, synthetic rubber (Neoprene – type A).
Reinforcement : Four (Six for – 20) alternating layers of spiraled, high tensile steel.

Special Features:

Designed for maximum flow rates.
Minimal Kinking or Collapsing during use and handling.
Cover Designed for superior abrasion resistance.

EFG5K SAE 100R13

Meets flame resistance acceptance designation ‘MSHA 2G’ for biodegradable hydraulic fluid.
Superior Impulse performance : tested to 1,000,000 impulse cycles.

Recommended for : Extremely high pressure, hydraulic applications. EFG5K is designed to meet all requirements of SAE 100R13 specifications and performance requirements of EN 856 4SH (-24 & -32) and EN 856 R13. Compatible with biodegradable hydraulic fluids like polyolester, polyglycols and vegetable oil .Enviro Fluid hoses also offer significantly lower permeation with petroleum based fluids .

Construction:

Tube : Black, oil resistant, synthetic rubber (Nitrile – type C).
Cover :Black, oil resistant, synthetic rubber Neoprene – type A).
Reinforcement : Four (Six for – 20) alternating layers of spiraled, high tensile steel.

Special Features:

Designed for maximum flow rates.
Minimal Kinking or Collapsing during use and handling.
Cover Designed for superior abrasion resistance

EFG4K SAE 100R12

Meets flame resistance exceptence designation ‘MSHA 2G’ for biodegradable hydraulic fluid.
Superior Impulse performance : tested to 1,000,000 impulse cycles.

Recommended for: Extremely high pressure, high impulse hydraulic applications. EFG4K is designed to meet all requirements of SAE 100R12, EN 856 R12 (-16) Compatible with biodegradable hydraulic fluids like polyolester, polyglycols and vegetable oil. Enviro Fluid hoses also offer significantly lower permeation with petroleum based fluids .

Service Temperature Range: -40ºC to +121ºC

Construction: Tube :

Black, oil resistant, synthetic rubber (Nitrile – type C).
Cover : Black, oil resistant, synthetic rubber Neoprene – type A).
Reinforcement : Four alternating layers of spiraled, high tensile steel.
Special Features:

Designed for maximum flow rates.
Minimal Kinking or Collapsing during use and handling.
Cover Designed for superior abrasion resistance

4XH

Meets flame resistance acceptance designation ‘MSHA 2G’ for biodegradable hydraulic fluid. Superior Impulse performance : tested to 1,000,000 impulse cycles.

* ABS type approval on -10, -12, -16 sizes
# DNV type approval on -12, -16 sizes

Recommended for: Extremely high pressure, high impulse applications. Most flexible EN 856 4SH hose in industry. Compatible with biodegradable hydraulic fluids like polyolester, polyglycols and vegetable oil as well as standard petroleum based fluids.

Service Temperature Range : -40ºC to +100ºC

Construction:

Tube: Black, oil resistant, synthetic rubber (Nitrile – type C).
Cover:Black, oil resistant, synthetic rubber (Neoprene – type A).
Reinforcement: Four alternating layers of spiraled, high tensile steel.
Special Features:

Designed for maximum flow rates.
Minimal Kinking or Collapsing during use and handling.
Cover Designed for superior abrasion resistance

4XP

Meets flame resistance acceptance designation ‘MSHA 2G’ for biodegradable hydraulic fluid.
Superior Impulse performance : tested to 1,000,000 impulse cycles.

Recommended for: Extremely high pressure, high impulse hydraulic applications. Most flexible EN 856 4SP hose in the industry. Superior impulse performance: tested to 1,000,000 impulse cycles at bend radius lower than EN 856 Standards. 4 XP hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum – based fluids.

Service Temperature Range: -40ºC to +100ºC

Construction:

Tube: Black, oil resistant, synthetic rubber (Nitrile).
Cover:Black, oil resistant, synthetic rubber (Nitrile).
Reinforcement: Four alternating layers of spiraled, high tensile steel wire.
Special Features:

Designed for maximum flow rates.
Minimal Kinking or Collapsing during use and handling.
Cover Designed for superior abrasion resistance

High Pressure

BHL X-TRA HOSE

Recommended For: Hose for high impulse and tight bend radius application. Mainly used for backhoe loader, other construction and earth moving application.
Tube: Nitrile Black
Reinforcement: 2 braid of high tensile steel wire
Cover: Specially modified synthetic rubber
Temperature Range: -40°C to +120°C

G2 2-WIRE BRAID HOSE—SAE 100R2

Recommended For: High-pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type Sand performance requirements of EN 853 2SN.
Tube: Black, oil-resistant synthetic rubber (Nitrile – Type C).
Reinforcement: Two braids of high-tensile steel wire.
Cover: Black, oil and abrasion resistant thin synthetic rubber (Modified Nitrile – Type C2).
Temperature Range: -40°C to +100°C

G2H HIGH-TEMP HIGH PRESSURE

Recommended For: High-pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and performance requirements of EN 853.
Tube: Black, oil-resistant synthetic rubber (Nitrile – Type C).
Reinforcement: Two braids of high-tensile steel wire.
Cover: Black, oil-resistant synthetic rubber (Hypalon† – Type M).
Temperature Range: -40°C to +135°C

J2AT 2-WIRE BRAID JACK HOSE

Recommended For: Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems.
Tube: Black, oil resistant, synthetic rubber (Nitrile – Type C).
Reinforcement: Two braids of high tensile steel wire.
Cover: Black, oil and abrasion resistant synthetic rubber (Modified Nitrile – Type C2).
Temperature Range: -40°C to +100°C

AG R2 2-WIRE BRAID HOSE – SAE 100R2 TYPE AT

Recommended For: High pressure hydraulic lines. Meets the requirements of SAE 100R2 Type AT & EN 853. Impulse tested up to 200,000
Tube: Black, oil resistant, synthetic rubber (Nitrile – Type C).
Reinforcement: Two braid of high tensile steel wire
Cover: Black, oil, and abrasion resistant, synthetic rubber (Modified CR).
Temperature Range: -40 C to +100 C
Coupling: G (MegaCrimp®) & PCK

Medium Pressure

G1 1-WIRE BRAID HOSE—SAE 100R1 TYPE

Recommended For: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R1 Type AT and performance requirements of DIN 20022 1SN / EN 853 1SN. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.
Tube: Black, oil-resistant synthetic rubber (Nitrile – Type C).
Reinforcement: One braid of high-tensile steel wire.
Cover: Black, oil and abrasion-resistant synthetic rubber (Modified Nitrile – Type C2).
Temperature Range: -40°C to +100°C

G1 1-WIRE BRAID HOSE—SAE 100R1 TYPE

Recommended For: Medium pressure hydraulic oil lines. Meets or exceeds requirements of SAE 100R1 Type AT.
Tube: Black, oil resistant, synthetic rubber (Nitrile – Type C).
Reinforcement: One braid of high tensile steel wire.
Cover: Black, oil and abrasion resistant synthetic rubber (Hypalon† – Type M).
Temperature Range: -40°C to +135°C

AGR1 AG R1 1-WIRE BRAID HOSE – SAE 100R1 TYPE AT

Recommended For: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R1 Type AT & EN 853 Impulse performance tested up to 1,50,000
Tube: Nitrile Black
Reinforcement: One braid of high-tensile steel wire.
Cover: Black, abrasion resistant synthetic rubber (Modified CR)
Temperature Range: -40 C to +100 C
Coupling: G (MegaCrimp®) & PCK